Simplifying Food Regulation

FDA Reader

FDA Reader: Simplifying Food Regulation

Posts tagged FSMA Summary
117 Subpart G: Supply Chain Program
Truck Supply Chain.png

What You Need To Know

  • Subpart G describes the requirements for a Supply Chain Program.

  • A Supply Chain Program demonstrates that your suppliers are producing their products (typically ingredients and packaging) in a safe manner.

  • You must have a Supply Chain Program if your hazard analysis revealed a hazard requiring a supply-chain control.

  • You have considerable leeway in how you verify your suppliers but there are some specific requirements (see below).

  • You are obligated to document and take prompt action if you learn a supplier is not controlling a hazard as required.


Applicability & Exemptions

This section applies to any business whose hazard analysis reveals a hazard requiring a supply-chain-applied control. This means you can't complete your Supply Chain Program until you have completed your hazard analysis.

For Example - Let's say that Ned's Raw Cookies uses pasteurized eggs as an ingredient in their product. Since Ned's Raw Cookies are sold and consumed raw, the company is not controlling for the salmonella hazard that is present in eggs.

In this case, Ned's Raw Cookies would likely rely on a supply-chain-applied control to minimize the salmonella hazard in their product. Ned's Raw Cookies would request documentation from their egg supplier to prove that the supplier is controlling the risk of salmonella. This documentation may be an audit result, a copy of supplier's food safety plan, or sufficient food safety records to show that that hazard has been controlled.

Exemptions:

You are not required to apply a supply-chain-applied-control in the following scenarios:

  1. No hazards requiring a supply chain applied control exist

  2. Your business (the receiving facility) is able to use a process control to eliminate/minimize the hazard.

  3. Your customer provides a written assurance that they must control the hazard.

  4. The food produced is not consumed by the public (i.e. it's only for research purposes within the company)

  5. The supplier is a "very small business"


What You Need to Do:

  1. Review your hazard analysis to determine whether there is a hazard which requires a supply-chain-applied control.

  2. Determine how you will approve the suppliers of those ingredients/packaging.

  3. Request documents from your suppliers (i.e. a recent inspection report or their food safety plan) to demonstrate that they are controlling for that hazard. You may also verify your supplier's product yourself by conducting tests.

  4. Review your suppliers' documents and document that you have reviewed them.

  5. Only use approved suppliers


What You Need to Have on File:

Your supply chain program must be written and contain the following:

  • An explanation of how you approve suppliers

  • A list of approved suppliers

  • A procedure for receiving products (i.e. a receiving SOP)

  • Each of the following documents for each supplier (if their ingredient has a hazard which requires a supply-chain control)

    • Documentation of having reviewed the supplier's food safety records.

    • A written inspection report of the supplier by the state, FDA, city, or other agency

  • Any records of supplier non-conformance and your response to that (could be a corrective action).

Summary of §117 Subpart G

Below is a summary of Subpart G so that you can get a quick sense of the requirements. If you want to read the original text, check out the source texts, linked below.

This text is aligned with the coding used in the FDA Regulations so that you can hunt down the corresponding section with ease. For example,  you have a question about my wording in §117.405 (a) (2) then just look up this same code in the CFR.

117.405 Requirement to Establish and Implement a Supply-Chain Program

a. 

  1. A facility must establish a risk-based supply-chain program for the ingredients and raw materials that have a hazard requiring a supply-chain-applied control.

  2. Importers who conduct foreign-supplier-verification programs don't need to conduct supply-chain-applied controls for those materials whose hazards have been mitigated.

  3. Requirements in this part don't apply to food whose use is research or testing. However this food,

i. May not be sold or given to the public

ii. Must be labeled "food for research or evaluation use"

iii. Is supplied in small quantity and disposed of.

iv. Is accompanied with documents stating the food is for research and not for public consumption.

b. The supply-chain program must be written.

c. If the supply-chain-applied control is applied by a 3rd party (i.e. not the receiving facility and not the produce supplier -- let's say it's a 3rd party that washes produce on behalf of a farm who sells it to a food processor), then the receiving facility must:

  1. verify the control themselves

  2. obtain documentation to verify that the control was applied.

§117.410 General Requirements Applicable to a Supply-Chain Program:

a. The supply-chain program must include:

  1. Using approved suppliers (i.e. an approved supplier list)

  2. The determination of appropriate supplier verification activities

  3. Conducting supplier verification activities

  4. Documenting supplier verification activities

  5. When applicable, verifying that a supply-chain-applied control was applied by a 3rd party.

b. The following are appropriate supplier verification activities for raw materials and other ingredients:

  1. Onsite audits

  2. Product sampling

  3. Review of suppliers food safety records

c. The supply chain program must provide assurance that a hazard requiring a supply-chain-applied control is minimized or prevented.

d. 

1. In approving suppliers and determining verification activities, you must consider:

i. The nature of the hazard

ii. Who will be applying the controls on behalf of your supplier

iii. Supplier performance, including their history, audit results, test results, etc.

iv. Storage and transportation practices

2. If you are considering the suppliers history, this may be limited if they are a small business, a farm, or a facility that is exempt from some FDA provisions.

e. If you learn that a supplier is not controlling a hazard that you identified must be controlled by the supplier, then you are obligated to document this and take prompt action.

117.415 Responsibilities of the Receiving Facility

a. 

1. the receiving facility must approve suppliers

2. The receiving facility must conduct all supplier verification activities.

3. A 3rd party may do the following on behalf of the receiving party:

i. establish procedures for receiving raw ingredients

ii. Document that written procedures for receiving raw materials are being followed

iii. Determine and conduct supplier verification activities

4. The supplier may conduct product testing themselves and provide this to the facility conducting the supplier verification.

b. A receiving facility may not accept any of the following as a supplier verification activity:

  1. Determination by the supplier of appropriate supplier verification activities.

  2. An audit conducted by the supplier

  3. A review of records by the supplier of the supplier.

c. The receiving facility may accept a 3rd party audit result provided by the supplier.

§117.420 Using Approved Suppliers

a. Approval of Suppliers The receiving facility must approve suppliers and document it before receiving ingredients from them.

b. Written procedures for receiving raw materials and other ingredients 

  1. You must write and implement procedures for receiving products (i.e. a receiving SOP)

  2. Your written procedures must ensure that ingredients are only received from approved suppliers

  3. The use of these written procedures must be documented (i.e. you must have a receiving log to show that you are following your written receiving procedure)

§117.430 Conducting Supplier Verification Activities for Raw Materials and Other Ingredients

a. You must conduct supplier verification activities before using the supplier.

b.

  1. When a hazard in a raw material will be controlled by the supplier and the outcome of exposure to the hazard results in a serious injury or death, then:

i. the appropriate supplier verification activity is an onsite audit

ii. the audit must be conducted before that raw material is supplied and at least annually thereafter.

2. The requirements above (b) (1) don't apply if other verification activities can provide assurance that this hazard is controlled.

c. If the supplier is a qualified facility, the receiving facility doesn't need to comply with parts (a) and (b) of this section.

  1. The receiving facility must get an annual written assurance of the quality facility exemption for their supplier.

  2. The receiving facility must get written assurance every 2 years that the supplier is compliant with FDA regulations or the equivalent. This must include

i. description of the preventive controls in place used to control hazards.

ii. Statement that the facility is in compliance with all applicable laws.

d. If the supplier is a farm that grows produce not covered under 112 (FDA produce standards), the receiving facility doesn't need to comply with parts (a) and (b) of this section.

  1. The receiving facility must get an annual written assurance of the supplier's exemption from part 112 for their supplier.

  2. Obtains written assurance that acknowledges that the food is subject to FDA regulations

e. If the supplier is a shell egg producer not subject to requirements of part 118 (FDA Shell Egg Standards) because they have fewer than 3,000 laying hens, the receiving facility doesn't need to comply with parts (a) and (b) of this section.

  1. The receiving facility must get an annual written assurance of the exemption from part 118 for their supplier, because the supplier has fewer than 3000 laying hens.

  2. Obtains written assurance that acknowledges that the food is subject to FDA regulations

f. There must not be any financial conflicts of interests related to verification (i.e. payments to a company performing supplier verification cannot be related to the results of the activity).

§117.435 Onsite Audit

a. An onsite audit must be performed by a qualified auditor

b. The auditor must consider all regulations to which a supplier is subject. The audit must include a review of food safety plan/HACCP plan.

c.

  1. The following may be substituted for an onsite audit:

i. Inspection results from the FDA, State, or local agency.

ii. Inspection results from an overseas FDA equivalent.

2. If the inspection is from a foreign authority recognized as equivalent to the FDA, then the food produced by the supplier must fall within the scope of that recognized authority.

§117.475 Records Documenting the Supply Chain Program

a. Records related to supply-chain program are subject to requirements of Subpart F

b. The receiving facility must review the supplier records below in part (c) in the same manner that they would complete their own record verification (as defined in §117.465)

c. The facility must document the following records in their supply-chain program

  1. Written supply chain program

  2. Documentation that an importer is in compliance with the supply chain verification program requirements.

  3. Documentation of the approval of that supplier

  4. Written procedures for receiving raw materials and ingredients.

  5. Documentation demonstrating the use of written procedures for receiving raw ingredients (This could be a receiving log)

  6. Documentation of the approval of the supplier

  7. Documentation of an onsite audit, including:

i. the name of the supplier being audited

ii. documentation of audit procedures

iii. dates of the audit

iv. conclusion of the audit

v. corrective actions to be taken in response to deficiencies found in the audit.

vi. documentation that the audit was conductected by a qualified auditor

8. Documentation of sampling and testing (if conducted as part of supplier verification) 

i. Identification of ingredient tested, number of samples tested.

ii. Identification of test conducted including the analytical methods.

iii. Dates of the tests

iv. Test results

v. Corrective actions taken in response to the testing

vi. Information identifying the lab conducting testing

9. Documentation of the review of the supplier's relevant food safety records.

i. The name of the supplier

ii. Dates of the record review

iii. General nature of the records review

iv. Conclusions of the review

v. Corrective actions taken in response to deficiencies found.

10. Documentation of other supplier verification activities conducted.

11. Documentation of the determination that verification activities conducted in lieu of an onsite audit are sufficient in the case that the hazard controlled by the supplier is one that could cause serious health consequences or death. You must provide adequate assurance that the supplier is controlling those hazards.

12. Documentation of an alternative verification activity if the supplier is a qualified facility.

13. Documentation of an alternative verification activity if the supplier is a farm.

14. Documentation of an alternative verification activity if the supplier is a shell egg producer.

15. The written results of an inspection of the supplier

16. Documentation of actions taken with respect to non conformance.

17. Documentation of mitigation of a hazard, if that control is applied by a 3rd party.

18. When applicable, documentation about the 3rd party and their verification activities.

 
117 Subpart F: Record Keeping

What You Need to Know

Record Keeping Blog Image.png
  • Records can be electronic or paper.

  • They must have:

    • Plant name / address

    • The date/time

    • Product name

    • Signature/initials

    • Actual information/observations not summaries

  • You must store records onsite for at least 2 years

  • You must be able to retrieve records within 24 hours.

  • All records must be made available upon request

All of our food safety plan templates are aligned with this section.

Summary of Subpart F: Record Keeping

Below is a summary of Subpart F so that you can get a deeper sense of the requirements. If you want to read the original text, check out the source texts, linked below.

This text is aligned with the coding used in the FDA Regulations so that you can hunt down the corresponding section with ease. For example,  you have a question about my wording in §117.305 (f) (2) then just look up this same code in the CFR.

§117.301 Records Subject to the Requirements of this Subpart

This section quickly states two points, neither of which are terribly important:

  1. Only the food safety plan must be dated and signed when created and updated.

  2. If a business is applying for a small business exemption (aka "Qualified Facility exemption") the standards for those records is less than what is described in this section.

§117.305 General Requirements Applying to Record

Records must:

a. Be kept as originals, true copies (i.e. scans, photocopies) or electronic records.

b. Contain the actual values and observations, not summaries.

c. Be accurate, unchangeable and legible

d. be created in real-time with the activity being documented.

e. Be as detailed as necessary

f. Include:

  1. information about the plant identity

  2. The date (and time, if necessary)

  3. Signature or initials of the observer

  4. Product name and lot code, if applicable

g. Electronic records required by other regulations may be subject to the requirements in Part 11 (This is the FDA section about electronic records, it unlikely applies to your business if you are following this statute)

§117.310 Additional Requirements Applying to the Food Safety Plan

The owner or operator of the plant must sign and date the food safety plan when it is first authored and whenever it is modified.

§117.315 Requirements for Record Retention:

a.

  1. All records must be retained onsite for 2 years

  2. A qualified facility must retain records attesting to their exempt status.

a. Small businesses operating under a Qualified Facility exemption must retain records to support that they apply for the exemption (typically 3 years of records)

b. Records that relate to equipment or processes that are no longer used must be retained for 2 years after their discontinuation.

c. You may store records offsite (not food safety plan) if you can retrieve them within 24 hours.

d. You can store a food safety plan offsite if the plant is closed

§117.320 Requirements for Official Review

All records must be made available upon request

§117.325 Public Disclosure

Your records may be disclosed by the FDA in accordance with Chapter 20 of the CFR

§117.330 Use of Existing Records

a. Existing records used for other purposes don't have to be duplicated to satisfy these requirements.

b. The records don't have to be kept in one set.

§117.335 Special Requirements Applicable to a Written Assurance

Any written assurance (which is required by other parts of the code) must contain the date and the names/signatures of the officials making the attestation.

Part 117 -- Subpart F: Requirements Applying to Records That Must Be Established and Maintained